RadioRecorder 3G+
RadioRecorder 3G+ (IP65) is a 1024ch standalone radiocontroller with integrated 3G-GSM modem, SD CARD flash and GPS. It opens new vast opportunities to control, diagnose, maintain distant illuminated objects from your office, home or car. While 3G provides data communication at a far higher speed than GSM, RadioRecorder 3G allows remote playback of 2 entire DMX universes (1024ch) both in standalone and fully interactive modes. Due to the integrated real time clock and GPS on the board, you can use several syncronized RadioRecorders 3G+ on the site.
RadioRecroder 3G+ offers an ideal solution for lighting installations on hard-to-reach outdoor sites, e.g. bridges, housefronts, high buildings. DMX-scenarios can be generated and scheduled with the special software or a lighting controller. We may as well apply LightConverse visualization software to simulate the show. Upload into RadioRecorder 3G+ can be made remotely (over GSM from a PC) or locally (over DMX/Ethernet cable from the lighting controller). Saved and scheduled DMX-senarios are output from RadioRecorder 3G+ over BE-DMX wireless technology to RadioGate receivers, over DMX or Ethernet cable to the controlled lights.
RadioRecorder 3G+ can also be operated with your cell phone!
Technical details:
| Input interfaces: | 3G-GSM, Ethernet (ArtNet/ACN), DMX512 |
| Output interfaces: | DMX512, Ethernet (ArtNet/ACN), RDM, Bluetooth (class1), 2,4 GHz |
| DMX-data update rate: | 44 Hz |
| Transmission range: | |
| standard antenna (3dBi) | up to 100 m* |
| special antenna | up to 1500 m* |
|
DMX-ports: |
2 independent |
|
Number of supported DMX channels: |
1024 |
|
Protocols supported: |
GSM, Bluetooth (class 1), DMX 512, RDM, MODBUS, ArtNet/ACN |
|
LED indication on the case: |
status of link with the receivers |
| Memory: | SD CARD flash |
| Syncronization: | over real time clock and GPS |
| Working temperature range: | from -40°C to +65°C |
| Protection rate: | IP65 |
| Size: | 55 x 170 x 120 mm |
| Power supply: | ~100V - 240V, 50/60 Hz |
| I/O conectors: | cable inlets, 1 MXLR & 1 FXLR galvanically isolated (5pins/3pins)**, outdoor etherCON (LAN) |
| Modes: | standalone, interactive |
*Transmission range is indicated for line-of-sight conditions. Other types of antennas can be chosen from the OPTIONS LIST.
**Number of pins are optional and chosen by the client when placing an order.