RadioRecorder 3G (IP65) is a 1024ch standalone radiocontroller with integrated 3G-GSM modem,  SD CARD flash and GPS. It opens new vast opportunities  to control, diagnose, maintain  distant illuminated objects from your office, home or car.  While 3G provides data communication at a far higher speed than  GSM,  RadioRecorder 3G allows remote playback of 2 entire DMX universes (1024ch)  both in standalone and fully interactive modes. Due to the integrated real time clock and GPS on the board, you can use several syncronized RadioRecorders 3G on the site. 

RadioRecroder 3G  offers an ideal solution for lighting installations on hard-to-reach outdoor sites, e.g. bridges, housefronts, high buildings. DMX-scenarios can be generated and scheduled  with the special software or a lighting controller. We may as well apply LightConverse visualization software  to simulate the show. Upload into RadioRecorder 3G can be made remotely (over GSM from a PC)  or locally (over DMX/Ethernet cable from the lighting controller).  Saved and scheduled DMX-senarios are output from RadioRecorder 3G  over DMX or Ethernet cable to the controlled lights.   

RadioRecorder can also be operated with your cell phone!

Technical details:

Input interfaces:	3G-GSM, Ethernet (ArtNet/ACN), DMX512
Output interfaces:	DMX512, Ethernet (ArtNet/ACN), RDM
DMX-data update rate:	44 Hz
DMX-ports:	2 independent
Number of  DMX channels:	1024
Protocols supported:	GSM, DMX 512, RDM, ArtNet/ACN, MODBUS
LED indication on the case:	status of DMX output
Memory:	SD CARD flash
Syncronization:	over integrated real time clock & GPS
Working temperature range:	from -40°C to +65°C
Protection rate:	IP65
Size:	55 x 170 x 120 mm
Power supply:	~100V - 240V, 50/60 Hz
I/O conectors:	cable inlets, 1 MXLR & 1 FXLR, galvanically isolated (5pins/3pins)**, outdoor etherCON (LAN)
Operation modes:	standalone, fully interactive

**Number of pins are optional and chosen by the customer while placing an order.